Reface Kitchen Cabinets Best Video and picture
If you are getting tired of the way that your kitchen looks but you don't want to spend thousands of dollars to remodel it, then you can make some changes instead. The best thing to do is reface kitchen cabinets, which sounds like it would be difficult but it actually is pretty simple.
The longer you leave the doors off and the longer you wait between applying different finishes, most likely you will have problems. So when you dive into the correct kitchen cabinets, make sure you have all the tools at hand. If you are very impatient, scan my article on the words in bold. They only list the tools you need.
All sets of surfacing material cabinet must include both a cordless screwdriver and more. You have the cordless drill and driver drill new sets both the new material and greatly accelerate the process of critical screws removed and replaced. However, do you also have to tighten the screws gently with a screwdriver in hand, so keep a flat head and a Phillips screwdriver in hand.
You will then have your trusty hammer and nails. Depending on the amount reface you do, it is possible that the nail and hammer for a variety of tasks. At least, the hammer is on hand to fit and support the drawer runners.
Never start a job like this without a tape measure and a level. I urge you to have both the belt and come to these over and over again.
Passing the cabinet refacing tools need more obvious and greenhouse leverage. Some people try to get away with a hammer to the role of the lever, but I encourage you to do this right and not cut corners. A hammer can damage drawer fronts when they lever, for example. Unless you have a half-dozen strong, calloused hands all the time, you'll need pliers with rubber feet to keep a number of parts and the level you drill or saw.
The last tool is a knife absolutely necessary. I encourage you to keep multiple sheets at hand. It is difficult to describe exactly where it is used, depending on how you approach your work in particular, but I can assure you that it will be very useful and time again.
Now, depending on exactly how significant refurbishment work in progress, may also need a miter saw and a table saw. The miter saw to cut the exact angle you want and give your table saw perfectly straight (if properly used, of course).
It goes without saying that you should have plenty of spare screws, nails, pencils and wood glue on hand. Excess always buy these data because it can be infuriating to run one of them or if you have lost a few.
I hope this helps you understand the long list of tools you need at your fingertips to cover kitchen cabinets correctly. Do not try to skimp on these tools, and it will only make it harder to work and when he is frustrated on a project like this only increases the probability of making careless mistakes, but expensive.
Refacing Kitchen Cabinets - Complete Instructions
6 parts
1-
2-
3-
4-
5-
6-
